MGx8Flasherv0.0.12

MGx8 Flasher connects over ENET or an MHD Wi-Fi adapter, identifies the ECU or TCU, saves a full backup and writes the calibration.

Licenses are not on sale online right now.

Request a license Download after purchase.
MGx8 Flasher writing a calibration, with the ECU identification and the session log

Beta softwareVersion 0.0.12. Use at your own risk.

BMW B58 engines, ZF 8HP transmissionsCompatibility depends on the software version.

Windows 10 or laterWith an ENET cable or an MHD Wi-Fi adapter.

Read and write

Flasher identifies the ECU over ENET, backs it up and writes a calibration or a full image, and it checks everything before anything is written.

Connect and identify

Choose ECU or TCU, connect, and Flasher reads what is in the car: the VIN, the ECU family, the hardware and software versions, the coding, the unlock state, the build date and the battery voltage.

  • BMW MG1 engine control units and ZF 8HP transmission control units
  • Every button that is off explains in its tooltip what is missing
  • The program offers updates by itself

Back up first

Full Read saves the complete memory of the ECU as a BIN file. A finished backup is checked before it replaces the destination file, and an unfinished one stays a separate .partial file that cannot be mistaken for a backup.

  • Virtual Read saves the factory reference file of your exact software version, without reading the ECU memory
  • It holds no VIN, ISN or other vehicle data, so it does not replace a Full Read

Flash Tune

Writes a modified calibration. Select the tune BIN and Flasher checks that it matches the software in the car, corrects its checksums, confirms the battery and shows the VIN and the ECU for confirmation before the write starts.

  • It needs your Flasher license for the vehicle and an internet connection
  • After the write it restores the vehicle data, restarts the ECU and checks it again
  • Cancel works until the write has really started; after that Flasher finishes it safely
  • Every session is saved with a journal, a snapshot of the vehicle and the result

Flash Full, Restore and OBD unlock

Flash Full writes a complete image from a clean original BIN, and on a locked ECU built before 09/2019 it can unlock the ECU over OBD as part of the write. Restore puts a clean original image back and removes any unlock.

  • Offered only when the ECU is supported and the license and voltage checks pass
  • Restore is a new operation, it never resumes a failed Full Flash

Flasher cannot resume an interrupted write by itself. Keep the vehicle power stable and keep your backup.

ZF 8HP transmissions

Read and write the software of supported ZF 8HP transmission control units. Flasher recognizes the transmission itself. Reading is available for the known versions, and writing only for the versions Flasher supports.

  • A separate toolbar for TCU read and write

Safe while it works

Every operation takes over the program from the first dialog to the result. During a read or write all buttons except Cancel are off, and the result stays on screen until you close it. The Session Log shows each step in plain words, and the files of every confirmed write are kept for you and for support.

Details

Version
0.0.12, beta
Size
43 MB
Requires
Windows 10 or later, and an internet connection for activation, license checks and updates
Connection
ENET cable or MHD Wi-Fi adapter
Supported
BMW B58 engines and compatible 8HP transmissions
Licenses
Not on sale online right now. Email us to request one
Download
After purchase, with your license key

Beta software. Currently supports BMW B58 engine ECUs and compatible ZF 8HP transmissions. Compatibility and functionality may vary with the software version. Use at your own risk. The developer is not responsible for any damage, data loss, or ECU or TCU failure.

Questions about Flasher

Which ECUs can Flasher write?

It identifies BMW MG1 ECUs and ZF 8HP transmissions and writes calibration on supported variants. Support grows with every release, so email us if you are unsure about yours: info@mgx8tech.com.

Can I back up my ECU first?

Yes, and you should. Backup Full reads the validated memory layout into a BIN file.

What if I change my laptop?

Install MGx8 on the new laptop and activate it with your key. A Single VIN license stays with the vehicle. An Unlimited VIN license is bound to one computer, so contact us to move it.

Does it work with MHD or xHP?

Not tested. Flasher is a new program and has not been tested with MHD or xHP. It may work, but we cannot guarantee it.